New 4-axle LAG tank trailer in stainless execution
For transportation of nitric acid
Tank:
- Tank in straight cylindrical execution, made of stainless chrome nickel steel, cold-rolled plate, 2B matt
- 3 chambers , 1 baffle wall in chamber 1 and 1 baffle wall in chamber 3
- The tank is made for a working pressure of 2,6 bar at a maximum transportation temperature of 50° C
according to the regulations
- The tank is made for a working pressure of 0,21 vacuum
- The welding seams are smooth on the inside
- The tank is pickled on the inside
- All mounted parts on the outside and under the isolation such as strengthening rings, spacer rings etc.
are made of stainless material
- Thickness of the plate approx. 3 mm
- Diameter approx. 2.100 mm
Chassis:
- Stainless I-chassis
Coupling plate:
- Coupling plate with SAE 2” King-Pin
Landing legs:
- Jost Modul B/S landing legs with mechanical operation, load capacity 2 x 12.000 kg
Axles:
- SAF Intradisc Plus Integral axles
- Load capacity 9.000 kg per axle. Centering (middle)
- Wabco Tasc raising/lowering valve, stainless spring brackets
- 1. axle automatic lift axles controlled via EBS sockets
- 4. axle steerable
Brakes:
- Wabco 2-circuit system
- ABS/EBS-E system 4S/3M on 2 axles, including RSS
- Aluminium air boiler
- Parking brake with pneumatic spring cylinder
- SmartBoard
Electronics:
- 24 V system, drip-proof EEC execution (9-pin) SAE-attachments and 15-pin AMP socket
- Aspöck Europoint II with fog- and reversing light, is connected with the SAE-attachment socket,
position lights in front by the tank support
- Orange LED side marker lights with integrated reflex
- Top lighting in the front and in the back
Attachments:
- 2 x wheel chocks with holders
- Lateral protection of anodized aluminium profiles
- Marking board
- Tool box of PVC (approx. 750 x 450 x 450 mm)
- ADR-equipment (12 kg fire extinguisher in cabinet of synthetic material)
- Stainless ladder
- Milometer
- ADR panel with digits of Chrome nickel steel
- Hazard symbol holders of chrome nickel steel
some Social media SOME@bolding.as
Jakob Bønning jab@bolding.as
Per Bolding CEO pb@bolding.as+45 20 45 19 11
Peter Bolding CEO pnb@bolding.as+45 20 46 50 33
Mogens Fensman Service Manager mf@bolding.as+45 75155033+45 27791911
Kathe Jensen Correspondent kj@bolding.as+45 92 92 27 71
Hans Ole Hansen Bookkeeper hoh@bolding.as+45 92 92 27 73
Islam Hamad Mechanic
Kasper Højgaard Sørensen Mechanic, Workshop Manager ks@bolding.as+45 60 15 50 33
Jørn Bolding Founder jb@bolding.as
Patrik Gustafsson Sales Sweden pg@bolding.as+46 (0) 76 022 06 66
Helle Bendtsen Homologation hb@bolding.as+45 92 92 27 72
Jørn Bolding Parts Aps Spareparts parts@bolding.as+45 75 15 50 33
+45 75 15 50 33
bolding@bolding.as
+45 20465033