Jørn Bolding A/S Salg, Rental And Leasing Of Special Trailers

Description

New 4-axle Hobur uninsulated tank trailer in straight self-supporting execution with high polish plates.
Model biogas.
Suitable for transportation of slurry.

Tank:
- Tank of stainless steel
- Working pressure approx. < 0,5 bar (no PED)
- Test pressure approx. 2,0 bar
- Negative pressure approx. 0,2 bar
- Outlet temperature approx. -20° C - +70° C
- Full ring construction, coupling- and mounting plate of stainless steel
- Plate ends 3,2 mm, tank shell 3,0 mm
- The tank is via 2 baffle walls divided into 3 identical sections
- Baffle wall supplied with overflow- and enlarged underflow opening
- 1 x manhole for the 1. section. Closable via a Fort-Vale folding lid (ø 500 mm) with 6 closing
devices and supplied with a sealing ring of neoprene
- 1 x hose hole for the 2. section. Closable via a Fort-Vale folding lid (ø 300 mm) with 3 closing
devices and supplied with a sealing ring of neoprene
- Outlet box of chrome nickel steel mounted under the tank
- Ball valve under the outlet box
- On the top of the side of the tank is an outlet box of chrome nickel steel, length 3.000 mm
- Length of tank approx. 11.750 mm

Chassis:
- Tank trailer is supplied with a 2” changeable King-Pin
- Mechanical Jost landing legs with 2 lifting/lowering speeds, load capacity approx. 24.000 kg
- Chassis frame made of stainless steel
- SAF axles
- Wheel gauge 2.140 mm (type off road)
- Disk brake dimensions 430 x 45 mm
- Air bellow diameter 360 mm
- 2 axles executed with ABS-sensor
- 3. and 4. axle are friction-steered
- 1. axle as lift axle, electrical operated via EBS
- Release valve for lowering of the lift axle
- SmartBoard which combines kilometre- and axle load reading in one system
- EBS brake system, 2-circuit system, Wabco
- Aluminium air tanks
- RSS (Roll Stability Support)
- Bumper with built-in lighting and combined underrun protection of stainless steel
- Lateral protection of anodized aluminium
- 4. axle with mudflaps
- 24 V system in drip-proof EEC-execution
- 2 x 7-pin and 1 x 15-pin sockets
- 2 x 2 round 3-chamber Hella diode lights with fog- and reversing light
- Clearance lights in the back and position lights in the front
- Orange LED side marker lights
- Top lighting mounted on the front and back

This tank trailer is constructed as biogas-execution and has following equipment:

- 1 x F. P. centrifugal pump in the back with 4 ports
- 1 x Börger self-priming pump in the back
- The vehicle unloads and loads via outlet in the back
- Crane and all other functions are wireless (radio-controlled)
- Danfoss valves type PVG 32
- Scanreco radio control with automatic-function for unloading and loading
- 10” pipe and hose in jib arm
- The whole crane of stainless steel
- Removable pipe end to change with cone pipe-biogas coupling
- There has been pulled 2 cables to the camera

In addition, the tank has following extras:

- Central lubrication system, max 35 lubrication points
- 6 x LED work lights: 2 lights on the crane and 4 lights on the tank
- 2 x warning lights mounted on top lights in the back
- Cleaning system in the tank